ACU-RITE 06005RM/1010RX 사용 설명서 - 페이지 6

{카테고리_이름} ACU-RITE 06005RM/1010RX에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACU-RITE 06005RM/1010RX 13 페이지. Display for 5-in-1 weather sensor

Select Measurement Units

To select between standard units (mph, ºF, etc.) or

metric units (kph, ºC, etc.):

1. Press the "▲" or "▼" buttons until "SET UNITS?"

is displayed on the Selectable Category part of

the display unit.

2. Press the "SET" button to set the unit preference.

3. Press the "▲" or "▼" to select "STAND" for

standard or "METRIC" for metric units.

4. Press the "SET" button to confirm your selection.

5. Next, you will see "WIND MPH". Press the "▲"

or "▼" to select MPH, KPH, or KNOTS for wind

speed units.

6. Press the "SET" button to confirm your selection.

Units are now set.

Placement for Maximum Accuracy

Display Unit Placement

Place the display unit in a dry area free of dirt and dust. To ensure

accurate temperature measurement, place out of direct sunlight and

away from heat sources or vents. Display unit stands upright for

tabletop use or is wall-mountable

Important Placement Guidelines

Display unit and sensor must be within 330 feet (100 m) of each other.

MAXIMIZE WIRELESS RANGE

Place units away from large metallic items, thick walls, metal surfaces, or other

objects that may limit wireless communication.

PREVENT WIRELESS INTERFERENCE

Place both units at least 3 feet (.9 m) away from electronic devices (TV,

computer, microwave, radio, etc.).