Cisco Webex DX70 사용자 설명서 - 페이지 17
{카테고리_이름} Cisco Webex DX70에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Webex DX70 40 페이지. Ce 9.5
페이지 인쇄
Video Calls
Change Call Rate
1
Tap the Call button (not shown), then locate
the entry whose call rate you want to alter
(not shown). Tap this entry to produce the Call
menu and then tap the More (...) icon below
the green Call button, as shown.
3
Move the slider to the required setting.
D1510422 User Guide
Cisco Webex DX70, DX80
Produced: September 2018 for CE9.5
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved
2
Tap Custom call.
4
Tap the green Call button to place the call.
17
About Call Rate
Call rate is the term used to express
the amount of bandwidth allocated to
the call. It is measured in kbps (kilobits
per second).
The higher the call rate is, the better
the quality will be, but on the expense
of higher bandwidth consumption.
The system comes with a default
call rate. This is normally set by your
video support team. Under normal
conditions the call rate will be adjusted
automatically by the system, whenever
needed. This is done to avoid choking
the video call when you try to call
someone at a higher rate than their
system and connection support.
If, for some reason, the automatic call
rate setting fails, you may also do this
manually as a last resort.
Call rate cannot be changed during a
call, but you may change it just before
you place a call, as shown at left.