Cisco 1230 구성 매뉴얼 - 페이지 31

{카테고리_이름} Cisco 1230에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1230 40 페이지. Wlc (wireless lan controller), wism (wireless services module) integrated wlc with aps

페이지 인쇄

Section 2: WMM

10. Set the

11. The handsets do not support dynamic power and will not utilize the

PN: 1725-36192-001_H

Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs

Screenshot for 1140 and 1250 series access points:

7. In the navigation pane under

8. Set

802.11b/g Network Status

after setting radio parameters.

For setting up the

survey, designed for voice traffic, to determine if you have sufficient

coverage to support all data rates. SpectraLink Wireless

Telephones require the following minimum dBm reading to support

the corresponding

802.11

Radio Standard

802.11b

802.11g

802.11a

For additional details on RF deployment please see the Deploying

Enterprise-Grade Wi-Fi Telephony white paper and the Best

Practices Guide for Deploying SpectraLink 8020/8030 Wireless

Telephones.

9. Use the default

Fragmentation Threshold

Beacon Period

information element that is set when DTPC Support is enabled. The

802.11b/g/n

. The radio will be re-enabled

Disable

please consult your facility's RF site

Data Rates,

data rate setting in the access point.

Mandatory

Minimum Available

Signal Strength (RSSI)

-70 dBm

-60 dBm

-63 dBm

-47 dBm

-60 dBm

-45 dBm

100

, click

Network

Maximum

"Mandatory" Data Rate

1 Mb/s

11 Mb/s

6 Mb/s

54 Mb/s

6 Mb/s

54 Mb/s

(2346 bytes).