Argo SDIAS8DC 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Argo SDIAS8DC에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo SDIAS8DC 19 페이지. Split air conditioner system
Argo SDIAS8DC에 대해서도 마찬가지입니다: 사용 설명서 (15 페이지), 사용 설명서 (17 페이지)

페이지 인쇄

4 - ADDITIONAL MATERIAL REQUIRED FOR INSTALLATION (NOT SUPPLIED)

Deoxidized annealed copper tube for refrigerant tubing connecting the units of the system; it has to be insulated with

●

foamed polyethylene (min. thickness 8mm). For tubing dimensions, tubing length and elevation difference limits, see

installation manual of outdoor unit.

MODEL

SDIA

SDIB

PVC pipe for condensate drain pipe (ø int.18mm) in length suitable to let the condensate flow into the outside drainage.

●

Anti-freeze oil for flare connections (about 30g.).

●

Electric wire: use insulated copper wires of size and length as shown in the paragraph "WIRING DIAGRAMS" (Outdoor

unit).

5 - OPERATING LIMITS

■ Cooling Maximum conditions

Outdoor temperature :

Room temperature :

■ Cooling Minimum conditions

Outdoor temperature :

Room temperature :

6 - ACCESSORIES SUPPLIED WITH THE UNIT

The following accessories are supplied with the unit:

• Remote control unit and accessories.

• Batteries for remote control unit.

• Receiver assembly.

7 - TOOLS REQUIRED FOR INSTALLATION (NOT SUPPLIED)

1. Standard screwdriver

2. Phillips head screwdriver

3. Knife or wire stripper

4. Tape measure

5. Level

6. Sabre saw or key hole saw

NARROW TUBE

OUTER DIAMETER

MIN. THICKNESS

6,35 mm

43°C D.B.

32°C D.B. / 23°C W.B.

–15°C D.B.

10°C D.B. / 6°C W.B.

7. Hacksaw

8. Core bits ø 8

9. Hammer

10. Drill

11. Tube cutter

OUTER DIAMETER

0,8 mm

9,52 mm

0,8 mm

12,7 mm

■ Heating Maximum conditions

Outdoor temperature :

Room temperature :

■ Heating Minimum conditions

Outdoor temperature :

Room temperature :

12. Tube flaring tool

13. Torque wrench

14. Adjustable wrench

15. Reamer (for reburring)

16. Hex. key

LARGE TUBE

MIN. THICKNESS

0,8 mm

24°C D.B. / 18°C W.B.

27°C D.B.

–15°C D.B.

5°C D.B.