Cisco 2600XM Series 빠른 시작 매뉴얼 - 페이지 12
{카테고리_이름} Cisco 2600XM Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2600XM Series 29 페이지. Including license and warranty
Cisco 2600XM Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (29 페이지), 데이터시트 (6 페이지), 데이터시트 (11 페이지)
페이지 인쇄
Figure 7
Bracket Installation for Center Mounting with Rear Panel Forward: 19-, 23-, or 24-Inch Rack
Note: The second bracket attaches
to the other side of the chassis.
Figure 8
Bracket Installation for Center Mounting with Front Panel Forward: 19-, 23-, or 24-Inch Rack
Note: The second bracket attaches
to the other side of the chassis.
Installing Chassis in Rack
Install the chassis in the rack. Rack-mounting screws are not provided with the router. Use two screws for each side (supplied
with the rack).
Wall-Mounting the Chassis—1-Rack-Unit (RU) Chassis Height Only
Cisco 2600XM series and Cisco 2612 routers can be attached to walls.
Attaching Rubber Feet
If you are mounting a Cisco 2600XM series or Cisco 2612 router on a wall, you must install the rubber feet that are supplied
in the accessory kit. They provide a space for air circulation. Peel the rubber feet from the adhesive strip, and attach them onto
the five round recesses on the bottom of the chassis.
Attaching Brackets
Attach the standard brackets to the chassis as shown in Figure 9, using the slotted hex-head screws and plastic spacers (supplied
in the accessory kit). Orient each spacer so that the shoulder fits into the slot in the bracket.
12
Brackets for
19-inch rack
23-inch or 24-inch rack
Brackets for
19-inch rack
23-inch or 24-inch rack
Brackets for
Brackets for