Argo ULISSE ECO 사용 설명서 - 페이지 9

{카테고리_이름} Argo ULISSE ECO에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo ULISSE ECO 16 페이지. Room air conditioner with remote condenser
Argo ULISSE ECO에 대해서도 마찬가지입니다: 설치 매뉴얼 (14 페이지)

페이지 인쇄

NIGHT MODE

This program is used to increase silence and comfort during

the night.

To activate the Night mode:

1. Press the button

to set the air conditioner in cooling

or dehumidification.

2. Press the button

3. The symbol

appears on the display. Press the

button again to release the function.

What does the NIGHT mode mean?

When you select the NIGHT mode, the air conditioner will

modify automatically the set temperature after 60 minutes: it

will be raised by 1°C.

This enables you to save energy without sacrificing your

comfort.

NOTE

During the NIGHT mode the internal fan speed is automatically

lowered, reduceing the noise.

ENERGY SAVING MODE (ECO)

This program is used to limit the maximum electrical power

absorbed by the unit.

When the energy saving program is selected, the air conditioner

limits the absorbed power to 75% of the maximum power. This

limit can be set by modifying parameter P12 on the remote

control (see paragraph "Parameters setting").

To activate the Energy save mode:

1. Press the button

to set the air conditioner in cooling

or dehumidification.

2. Press the button

3. The symbol

appears on the display. Press the button

again to release the function.

TURBO MODE

This program is used to increase the maximum power that

can be supplied by the air conditioner, even if it involves less

silence.

To activate the Turbo mode:

1. Press the button

to set the air conditioner in cooling .

2. Press the button

3. The symbol

appears on the display. Press the button

again to release the function.

TIMER SELECTION

To select the timer, press the button

remote control, then press the button

desired schedule:

NOTE

In the event of a power failure and restoration, the timer

selection must be performed again.

to switch on the

to chose the

or "OFF"

HOW TO SET SCHEDULES

A) DELAYED TIMER

This timer is used to start the unit (if it

is off) or to stop the unit (if it is on) after

a certain time, to set the delayed time.

1. Press the Timer

seconds.

2. Press the arrow "up"

delayed timer

3. Press the button

indication starts flashing; set the hour

with the arrows.

4. Press the button

again: the minutes

indication starts flashing; set the minutes

with the arrows.

5. Confirm with the button

the button

to exit the delayed timer

menu.

B) SCHEDULE

This timer is used to turn the unit on and

off at predefined times and days.

1. Press the Timer

seconds.

2. Press the arrow "up"

schedule to be set (

3. Press the button

starts flashing.

4. Press the button

again: AM indication

starts flashing (you can choose AM or

PM with the arrows).

5. Press the button

: the hour indication

starts flashing; set the desired hour with

the arrows.

6. Press the button

again: the minutes

indication starts flashing; set the minutes

with the arrows.

7. Press the button

starts flashing.

8. Repeat the same procedure to set AM

or PM, hour and minutes.

9. At this point, press the "up"

and WEEK will start flashing.

9. Press the button

the first day of the week starts flashing;

set ON or OFF with the arrows, then

confirm with the button

9. The indication of the second day of

the week starts flashing: repeat the

procedure with every day of the week,

if desired.

10. At the end press

to exit the menu.

NOTE

•

It is possible to set up to 3 weekly schedules at different

times using the timers.

RESET BUTTON

Press the RESET button on the back of the remote control if

you want to reset all settings and return to the factory setting.

button for a few

to select the

ARROWS

: the hour

, then press

button for a few

to select the

WEEK

) .

: ON indication

ARROWS

: OFF indication

arrow

WEEK

: the indication of

RESET