Cisco 2691 Series 사용자 설명서 - 페이지 8
{카테고리_이름} Cisco 2691 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2691 Series 48 페이지. Modular routers
Cisco 2691 Series에 대해서도 마찬가지입니다: 설치 및 포맷 (34 페이지), 데이터시트 (8 페이지), 빠른 시작 매뉴얼 (29 페이지)
페이지 인쇄
The Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, 3745, and 7206 VXR NPE-400 Routers
Table 2
LED
WIC 1
ACT/CH1
ETH ACT
ETH COL
Table 3
LED
PWR
OK
PVDM 0
OK
PVDM 1
OK
MOD OK
FDX
100 Mbps
LINK
SLOT 0 OK Green
0
1
SLOT 1 OK Green
0
Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, and 3745 Modular Access Routers and 7206-VXR NPE-400 Router FIPS 140-2 Non-Proprietary
8
Cisco 1721 Front Panel LEDs and Descriptions (Continued)
Indication
Description
Green
Serial and CSU/DSU cards—Remains off
ISDN cards—On solid when the second ISDN B channel is up for the card
in the WIC1 slot
2-port serial cards—Blinks when data is being sent to or received from the
second port on the 2-port card in the WIC1 slot
Green
Blinks when there is network activity on the Ethernet port
Yellow
Blinks when there are packet collisions on the local Ethernet network
Cisco 1760 Front Panel LEDs and Descriptions
Indication
Description
Green
Power is supplied to the router
Off
The router is not powered on
Green
The router has successfully booted up and the software is functional. This
LED blinks during the power-on self-test (POST)
Off
The router has not successfully booted up
Green
On when a packet voice data module (PVDM) is correctly inserted in
PVDM card slot 0
Green
n when a packet voice data module (PVDM) is correctly inserted in PVDM
card slot 1
Green
On when a VPN module is present
Green
The interface is transmitting data in full-duplex mode
Off
When off, the interface is transmitting data in half-duplex mode
Green
The speed of the interface is 100 Mbps
Off
The speed of the interface is 10 Mbps or no link is established
Green
An Ethernet link has been established
Off
No Ethernet link established
On when either a WIC or a VIC is correctly inserted in the card slot
Green
ISDN—On when the first ISDN B channel is connected
Serial, CSU/DSU, and VIC—Blinks when data is being sent to or received
from port 0 in slot 0. For the VIC-2BRI-ST-NT/TE, blinks when data is
being sent to or received from any of the B channels
Green
ISDN—On when the second ISDN B channel is connected
Serial and VIC—Blinks when data is being sent to or received from port 1
in slot 0
On when either a WIC or a VIC is correctly inserted in the card slot
Green
ISDN—On when the first ISDN B channel is connected
Serial, CSU/DSU, and VIC—Blinks when data is being sent to or received
from port 0 in slot 1
OL-6083-01