Cisco 2800 Series 빠른 시작 매뉴얼 - 페이지 19

{카테고리_이름} Cisco 2800 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2800 Series 47 페이지. Cisco ios software configuration
Cisco 2800 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (13 페이지), 데이터시트 (8 페이지), 애플리케이션 노트 (41 페이지), 빠른 시작 매뉴얼 (45 페이지), 구성 (10 페이지), 개요 (27 페이지), 데이터시트 (5 페이지), 데이터시트 (20 페이지), 구성 (32 페이지)

페이지 인쇄
Cisco 2800 Series 빠른 시작 매뉴얼
Figure 16
NEBS-Compliant Chassis Ground Connection on Cisco 2821 or Cisco 2851 Chassis
A= ACT
S= SPE
A= FDX
A
ED
FE 0/1
A= LIN K
F
FE 0/0
A
S
F
L
S
L
PVD M2
PVD M1
PVD M0
AIM 1
AIM 0
Figure 17
Chassis Ground Connection Using Ring Terminal on Cisco 2821 or Cisco 2851 Chassis
A= ACT
S= SPE
A= FDX
A
ED
FE 0/1
A= LIN K
F
FE 0/0
A
S
F
L
S
L
PVD M2
PVD M1
PVD M0
AIM 1
AIM 0
5

Connect Cables

Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
The ISDN connection is regarded as a source of voltage that should be inaccessible to user contact. Do not attempt
to tamper with or open any public telephone operator (PTO)-provided equipment or connection hardware. Any
hardwired connection (other than by a nonremovable, connect-one-time-only plug) must be made only by PTO staff
or suitably trained engineers. Statement 23
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be accessed only
through the use of a special tool, lock and key, or other means of security. Statement 1017
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001
Ground lug
Ring terminal
attachment
19