Sony XCHR70 기술 매뉴얼 - 페이지 27

{카테고리_이름} Sony XCHR70에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony XCHR70 32 페이지. Black-and-white video camera module
Sony XCHR70에 대해서도 마찬가지입니다: 브로셔 (4 페이지), 사양 (4 페이지), 치수 (2 페이지), 운영 지침 (2 페이지)

페이지 인쇄

Setting the shutter speed using the DIP switches

External trigger shutter operation

2 µ s to 250 ms

Trigger*

Exposure time (Te)*

Video out*

WEN

796 H (Binning OFF)

398 H (Binning ON)

*1 This is an external input signal.

*2 The exposure time (Te) is determined by the

setting of the DIP switches.

For details, see page 17.

*3 Normal operation is resumed when the trigger

pulse width is 1/3 s or more. The trigger falling

edge restores external trigger shutter operation. At

this time, the 50 ms after the falling edge of the

trigger pulse is an external trigger input inhibition

area. There is no guarantee of operation for any

trigger input in this period.

Trigger pulse width*

*4 The image is output at the shortest timing from the

trigger rising edge according to the DIP switch

setting. The image is output synchronized with the

WEN pulse rising edge.

*5 With the XC-HR70, a signal synchronized with

VD cycle is not output.

Note

An image is not output correctly when the next trigger

is input before the image for the previous trigger has

been output.

Mode transition state

External input

inhibition area

Normal operation*

Mode Settings

External trigger

(50 ms)

shutter operation

Exposure time

(Te)*