Sony XDCAM PDW-HR1 운영 매뉴얼 - 페이지 22

{카테고리_이름} Sony XDCAM PDW-HR1에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony XDCAM PDW-HR1 49 페이지. Sxs memory card adaptor
Sony XDCAM PDW-HR1에 대해서도 마찬가지입니다: 브로셔 및 사양 (28 페이지), 브로셔 (4 페이지), 설치 매뉴얼 (16 페이지)

페이지 인쇄

Clip Operations

Playing clips

To select clip thumbnails

Do one of the following to move the yellow cursor to the

clip that you want to select.

• Turn the PUSH SET knob.

• Press the V/MARK1, v/MARK2, B, or b button.

• Press the PREV or NEXT button.

To select the first thumbnail

With the SHIFT button held down, press the PREV button.

To select the last thumbnail

With the SHIFT button held down, press the NEXT button.

To play clips sequentially starting from a

selected clip

Select the thumbnail of the clip that you want to play, and

then press the PLAY button.

Play begins from the top of the selected clip. When the last

clip has been played to the end, this board enters pause

(still image) mode at the last frame of the last clip.

Press the THUMBNAIL/ESSENCE MARK button to

return to the thumbnail screen.

Notes

• There may be momentary picture breakup or still image

display at the transition from one clip to another. During

this time, the playback controls and the THUMBNAIL/

ESSENCE MARK button cannot be operated.

• When you select a clip in the thumbnail screen and begin

playback, there may be momentary picture breakup at

the top of the clip. To view the top of the clip without

breakup, put this board into playback mode, pause, use

the PREV button to return to the top of the clip, and start

playback again.

• On SxS memory cards that contain both HD-mode and

SD-mode clips, you cannot play all clips in sequence.

For example, while an HD mode thumbnail screen is

displayed, only HD mode clips are played in sequence.

To pause playback

Press the PAUSE button.

Press the button again to return to playback mode.

To play at high speed

With the PLAY button held down, press the NEXT or

PREV button.

To return to normal playback, press the PLAY button.

Clip Operations

To stop playback

• Press the STOP button: Playback stops and a still image

is displayed.

• Press the THUMBNAIL/ESSENCE MARK button:

Playback stops and the thumbnail screen appears on the

display.

Playback also stops if you eject the memory card.

To cue up clips

To return to the top of the current clip

Press the PREV button.

• During playback, this jumps to the top of the current clip

and starts playback.

• During F FWD, F REV, or pause, this jumps to the top

of the current clip and displays a still image.

• Each subsequent press of the button moves to the

previous clip.

To play from the top of the first clip

With the SHIFT button held down, press the PREV button.

This jumps to the top of the first clip on the recording

media.

To jump to the top of the next clip

Press the NEXT button.

• During playback, this jumps to the top of the next clip

and starts playback.

• During F FWD, F REV, or pause, this jumps to the top

of the next clip and displays a still image.

• Each subsequent press of the button moves to the next

clip.

To jump to the last frame of the last clip

With the SHIFT button held down, press the NEXT button.

This jumps to the last frame of the last clip on the recording

media.

To add a shot mark during playback

A Shot Mark1 essence mark or Shot Mark2 essence mark

is set if you hold down the V/MARK1 or v/MARK2

button and press the PUSH SET knob or the SET button

during playback.

Notes

• Shot marks cannot be recorded when the recording

media is write protected.

• Shot marks cannot be added at the last frame of a clip.