Cisco 5400 설치 및 업그레이드
{카테고리_이름} Cisco 5400에 대한 설치 및 업그레이드을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 5400 8 페이지. Frus
Cisco 5400에 대해서도 마찬가지입니다: 설치 준비 (6 페이지)
페이지 인쇄
Installing and Upgrading FRUs
•
•
•
•
•
•
Removing and Replacing the Chassis Cover
These are the steps to remove the chassis cover:
1. Confirm the router is turned off and disconnected from the power supply or power supplies.
2. Place the chassis on a flat surface.
3. Remove the screws at top of the chassis cover.
4. Remove the screws at the sides of the device (See Figure 11).
5. Lift the chassis cover once you have removed all the screws.
Figure 1: Removing the Chassis Cover
Removing and Replacing the Chassis Cover, on page 1
Replacing the Power Supply, on page 2
Installing Drive Bays, on page 2
Upgrading the M.2 Storage Module, on page 3
Installing and Removing a DIMM, on page 4
Installing and Removing a NIM, on page 7
Installing and Upgrading FRUs
1