Cisco 5500 Series 설치 매뉴얼 - 페이지 11
{카테고리_이름} Cisco 5500 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 5500 Series 34 페이지. Cisco 8500 series
wireless lan controller
Cisco 5500 Series에 대해서도 마찬가지입니다: 구성 매뉴얼 (40 페이지), 매뉴얼 (19 페이지), 구성 매뉴얼 (50 페이지)
페이지 인쇄
Installing the Chassis
The controller ships with rack mounting brackets and the desktop or shelf mounting rubber feet in a
separate bag.
An adjustable rack-mount kit is included for mounting the controller in a standard 19-inch (48.3 cm)
equipment rack. A standard equipment rack has two unobstructed outer posts, a minimum depth between
the front and rear mounting posts of 13 inches (33 cm), and a maximum depth of 32 inches (81.3 cm).
You can also install the controller in a 2-post equipment rack.
This kit is not suitable for racks with obstructions (such as a power strip) that could impair access to
system components.
Figure 3
Figure 3
1
2
3
4
The following sections cover the different installation options:
•
•
•
•
78-18998-01
shows the contents of the mounting kit.
Mounting Kit
1
4
Front brackets (2)
Rear bracket adapters (2)
Short slide-mount brackets (2)
Long slide-mount brackets (2)
Installing the Controller on a Desktop or Shelf, page 12
Installing the Controller in a 4-Post Rack, page 12
Installing the Controller in a 2-Post Rack—Flush Mount, page 16
Installing the Controller in a 2-Post Rack—Mid-Mount, page 18
2
5
12-24 x 0.75 in pan head screws (8)
6
10-32 x 0.75 in pan head screws (8)
7
M4x0.7 x 8mm flat head screws (6)
8
M3x0.5 x 6mm flat head screws (6)
Cisco 5500 Series Wireless Controller Installation Guide
Unpacking and Installing the Controller
3
8
7
6
5
11