Argo HI FLOOR DESIGN 운영 지침 - 페이지 5

{카테고리_이름} Argo HI FLOOR DESIGN에 대한 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo HI FLOOR DESIGN 5 페이지. Electric convection heater

Argo HI FLOOR DESIGN 운영 지침
OPERATING TIMER (HI FLOOR DESIGN PLUS model)
The model HI FAN DESIGN PLUS is also equipped with 24 hours timer, which has 96 segments, each of which
corresponds to 15 minutes of time and allows the lighting and working programming of during the 24 hours.
Red switch on - OFF:
The convector doesn't work
or stop working.
Red switch on I - ON:
The convector works
continuously, depending
only on thermostat
regulation.
In the event of overheating, the convector protection system automatically disables the heating elements, turning the
appliance off.
To understand whether it has turned off due to intervention by this system, rotate the thermostat switch to maximum
temperature (max) to verify that the thermostat has not simply turned the convector off due to having reached the set
temperature.
Should the appliance not return to normal operation due to the safety device having intervened:
1. turn the convector off;
2. remove any cause of overheating (e.g. obstacles on the air outlet or intake grille, dust deposits in the appliance, etc.
3. leave the appliance to cool for 15 – 20 minutes;
4. turn the convector on again.
Always unplug and leave the convector to cool before cleaning.
Use a damp cloth to clean the convector exterior and remove dust. Leave the casing to dry before using the
convector again.
Do not allow water to enter the convector.
Do not use benzene, solvents or abrasive compounds to clean the convector, as these may damage the casing.
Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
Ensure that the convector is dry before inserting the plug.
Do not use metal tools to clean the convector. Any metal fragments that may detach may come into contact with the
panel's electrical components and cause a short-circuit.
In the event of malfunctions or damages, always contact an authorised service centre.
If the convector is not used for prolonged periods, it must be stored together with this manual in its original packaging, in
a cool and dry place. Never put the appliance away when still hot. Always wait for it to cool down.
INFORMATION ON PROPER DISPOSAL OF THE APPLIANCE IN COMPLIANCE WITH EUROPEAN
DIRECTIVE 200/94/EC.
When this appliance reaches the end of its useful life, it must not be disposed of together with household waste
but must be delivered to appropriate separate waste disposal plants or to dealers that provide similar service.
Separate waste disposal of electrical and electronic appliances prevents possible negative effects on the
environment and human health resulting from inadequate disposal, and also allows for recovering and recycling
the materials comprising the appliances to ensure significant saving in terms of energy and resources. The
separate disposal obligation is underlined by the crossed-out dustbin symbol appearing on the product. Illegal
disposal of the product by the user shall determine the application of the administrative sanctions defined by the
regulations in force.
V 05/11
OVERHEATING SAFETY DEVICE
HOW TO CLEAN THE CONVECTOR
STORING THE CONVECTOR
www.argoclima.com
Red switch on
- Timer ON:
It allows you to program the convector on and off timing.
Place the outer ring on the time you want the convector turn on: for
example, to set the lighting at 8 p.m. turn the outer ring clockwise
until the arrow indicator corresponds to the number 20.
Then set the time the heater is required to run by pulling the
segments around the outer ring forward appropriate to the
running period(s) required. Whereas every rider is 15 minutes, to
1 set 1 hour move out 4 riders between 20 and 21.
When set, the heater will operate each day during the times
programmed. Note, the heater must always be plugged into a
power socket, the power selector must be in the on position
and the thermostat must be suitably set to ensure the
heater will come on.
The unit will shut off after the set time. During the set, the
operation the unit will still be governed also by the thermostat.
N.B.
If you leave the red switch on
on automatically every day at the same time, as long as
power supplì is connected, the power selector is not on 0
and the thermostat is a medium position.
, the convector will turn
);
10