Cisco 7200-I/O-GE+E 사용자 설명서 - 페이지 11
{카테고리_이름} Cisco 7200-I/O-GE+E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7200-I/O-GE+E 16 페이지. Input/output controllers
페이지 인쇄
Cisco 7200-I/O-GE+E and Cisco 7200-I/O-2FE/E Input/Output Controllers
show controllers gigabitethernet
To display initialization block information, transmit ring, receive ring, and errors for the interface
controllers about the Gigabit Ethernet interface of the Cisco 7200-I/O-GE+E, use the
show controllers gigabitethernet privileged EXEC command.
Syntax Description
slot
port
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Release
11.1 CC
12.1(3a)E
12.1(5)T
12.2(14)S
Usage Guidelines
This command is used on the Cisco 7200-I/O-GE+E to display hardware and software information
about the Gigabit Ethernet interface.The I/O controller is always found in slot 0.
show controllers gigabitethernet slot/port
Slot number on the interface.
Port number on the interface.
Modification
This command was introduced.
Support for the Cisco 7200-I/O-GE+E controller was introduced.
This command was integrated into Cisco IOS Release 12.1(5)T.
This command was integrated into Cisco IOS Release 12.2(14)S.
show controllers gigabitethernet
12.1(5)T and 12.2(14) S
11