Cisco 7513 Series 교체 지침 매뉴얼 - 페이지 3
{카테고리_이름} Cisco 7513 Series에 대한 교체 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7513 Series 19 페이지. Chassis replacement
Cisco 7513 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (44 페이지), 교체 지침 매뉴얼 (26 페이지), 데이터시트 (11 페이지), 매뉴얼 (30 페이지), 유지 관리 (20 페이지), 교체 지침 매뉴얼 (22 페이지)
페이지 인쇄
Figure 2
Dual arbiter
Chassis
interface
Installation Safety, ESD Precautions, and Tools Required
Before you begin replacing the backplane and card cage assembly, review the safety guidelines in
this section to avoid injuring yourself or damaging the equipment. This section also lists of the tools
and parts you need to perform this procedure.
Safety Guidelines
The following guidelines will help to ensure your safety and protect the equipment. This list is not
inclusive of all potentially hazardous situations, so be alert.
•
Never try to lift the chassis by yourself; two people are required to lift the Cisco 7513.
•
Always disconnect all power cords and interface cables before moving the chassis.
•
Keep tools and chassis components away from walk areas.
•
Do not work alone if potentially hazardous conditions exist.
•
Do not perform any action that creates a potential hazard to people or makes the equipment
unsafe.
•
Carefully examine your work area for possible hazards such as moist floors, ungrounded power
extension cables, and missing safety grounds.
Location of the Dual Arbiter and Chassis Interface on the Rear of the Backplane
Cisco 7513 Card Cage and Backplane Assembly Replacement Instructions
Installation Safety, ESD Precautions, and Tools Required
3