Argo DRY BABY 11 사용 설명서 - 페이지 6
{카테고리_이름} Argo DRY BABY 11에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo DRY BABY 11 10 페이지.
Argo DRY BABY 11에 대해서도 마찬가지입니다: 사용 설명서 (6 페이지), 사용 설명서 (8 페이지)
페이지 인쇄
To turn the dehumidifier off press the ON/OFF button. This shuts off power to the unit.
Unplug the appliance if you do not intend to use it for some time.
The water extracted from the air can be collected in the provided front tank.
When the tank is full, not inserted or not correctly inserted, the FULL TANK led turns on and the unit beeps for about 10
seconds, at the end of which the unit turns off.
To switch off the appliance, press the ON/OFF button and wait a few seconds.
1.
Carefully remove the tank using both hands and following the direction of the arrow.
2.
Empty the tank.
3.
Reposition the tank following the direction of the arrow.
(1)
Do not use the drain hose when you are collecting condensation in the tank, otherwise water can leak out of the hose.
The water can be continuously drained when using a PVC hose with an inner diameter of 14 mm (not supplied)
Turn off the appliance and remove the plug before connecting the hose.
Open the small side door, remove the tank and safely connect the hose to the continuous condensate discharge
connection, as shown in the figures below.
The height of the drainage hose must not exceed that of the hole: do not block the drainage hose exit.
V 09/17
TURNING THE DEHUMIDIFIER OFF
HOW TO ELIMINATE CONDENSATE
N.B.
CONTINUOUS CONDENSATE DRAINAGE
Tank
(2)
(3)
16