Cisco 7606 사용자 설명서 - 페이지 11

{카테고리_이름} Cisco 7606에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7606 28 페이지. User guide
Cisco 7606에 대해서도 마찬가지입니다: 브로셔 (8 페이지)

Crypto Officer Role

During initial configuration of the router, the crypto officer password (the "enable" password) is defined.

A crypto officer may assign permission to access the crypto officer role to additional accounts, which

creates additional crypto officers.

The crypto officer role is responsible for the configuration and maintenance of the router. The crypto

officer services consist of the following:

•

User Services

A user enters the system by accessing the console port with a terminal program. Cisco IOS prompts the

user for their password. If the password is correct, the user is allowed entry to the Cisco IOS executive

program. The user services consist of the following:

•

OL-6334-01

Configuring the router—Defines network interfaces and settings, creates command aliases, sets the

protocols the switch or router will support, enables interfaces and network services, sets system date

and time, and loads authentication information.

Defining rules and filters—Creates packet filters that are applied to user data streams on each

interface. Each filter consists of a set of rules, which define a set of packets to permit- or deny-based

characteristics such as protocol ID, addresses, ports, TCP connection establishment, or packet

direction.

Status functions—Views the router configuration, routing tables, and active sessions, uses the Get

commands to view SNMP MIB II statistics, health, temperature, memory status, voltage, and packet

statistics, reviews accounting logs, and views physical interface status.

Managing the switch or the router—Logs off users, shuts down or reloads the switch or router,

manually backs up switch or router configurations, views complete configurations, manages user

rights, and restores switch or router configurations.

Setting encryption and bypass—Sets up the configuration tables for IP tunneling. Sets keys and

algorithms to be used for each IP range or allow plaintext packets to be set from a specified IP

address.

Changing port adapters—Inserts and removes adapters in a port adapter slot.

Status functions—Views state of interfaces, state of Layer 2 protocols, and version of Cisco IOS

currently running.

Network functions—Connects to other network devices (using outgoing TELNET or PPP) and

initiates diagnostic network services (that is, ping, mtrace).

Terminal functions—Adjusts the terminal session (for example, locks the terminal, adjusts flow

control).

Directory Services—Displays the directory of files kept in flash memory.

Catalyst 6509 Switch, Cisco 7606 Router, and Cisco 7609 Router with VPN Services Module Certification Note

Roles and Services