Sony 6116.12 RX100 III 사용 설명서 - 페이지 7

{카테고리_이름} Sony 6116.12 RX100 III에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony 6116.12 RX100 III 32 페이지. Digital housing (dsc-rx100m3/b)

Housing and Camera Setup

Setup your camera for underwater use and then adjust your settings once underwater.

Set Mode Dial to "A" Aperture Priority. Manually adjust aperture setting to

achieve the best exposure for your shooting conditions. The shutter

speed will be locked at 1/30th second. If a faster shutter speed is

desired, set Mode Dial to "M" Manual mode to manually adjust both

aperture and shutter speed settings.

In MENU settings:

Set Image Size to "L: 20M" and Aspect Ratio to "3:2" or other preffered

setting.

Set Quality to "X.FINE" Extra Fine."

Set Drive Mode to "Single Shooting" and Red Eye Reduction to "Off."

Set Focus Mode to "Single-shot AF" and Focus Area to "Center."

Set AF Illuminator to "Off."

Set ISO to "200" and ND Filter to "Off."

Set Metering Mode to "Center" and White Balance to "Auto WB." For

best results and when using a color filter, manually set white balance

for each working depth.

Set DRO/Auto HDR "OFF."

Set SteadyShot to "On" and Auto Review to "5 Sec."

Set Pre-AF to "On" and Zoom Setting to "Optical Zoom Only."

Set Monitor Brightness to "Manual +1."

Set Pwr Save Start Time to "5 min."

Set Date and Time.

Insert and Format a memory card.

Set Flash Mode to "Fill-flash

(before placing camera in housing)