Argo LILIUM EVO 11 사용 설명서 - 페이지 8

{카테고리_이름} Argo LILIUM EVO 11에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Argo LILIUM EVO 11 12 페이지.

LED TIMER

LED TANK FULL

LED DEFROST

LED CHILD LOCK

HIGH-LOW FAN

SPEED LED

"+" AND "-"

(3)

BUTTON

BUTTONS

(1) ON/OFF BUTTON

Press this button to turn the dehumidifier on and off.

(2) MODE BUTTON

Press this button to enter the mode selection state: the corresponding led will light on. Press "+" or "-" button to set

the mode; the current mode led will flash. You can select 4 different modes: Deumidify, Automatic, Continuous and

Fast dry clothes. Press the mode button again to confirm the mode selection.

(3) "+" & "-" BUTTON

Press this button to set the humidity, timing and dehumidification mode.

The humidity can be set only in dehumidify mode from 30% to 80% by pressing these buttons.

The timer can be set from 1 to 24 hours by pressing these buttons.

The dehumidification mode can be set by pressing MODE button and then "+" and "-" buttons; the corresponding led

indicator lights on.

(4) FAN BUTTON

Press this button to set the fan speed: high and low speed; the corresponding led lights on.

NOTE: This button is valid only when DEUMIDIFY and FAN mode are set.

(5) TIMER ON/OFF BUTTON

Press this button to set the timer from 1 to 24 hours.

If the timer is set to 0 and you press TIMER button or there is no operation in 5 seconds, the dehumidifier will

automatically enter the time off work state.

If the timer isn't set to 0 and you press TIMER button, the dehumidifier will automatically enter the time off work

state and led lights off; if you don't press the TIMER button and there is no operation in 5 seconds, the time will set

automatically and LED TIMER lights on. After 5 seconds, the humidity level will return on display.

V 11/18

CONTROL PANEL

DISPLAY

(5) TIMER

BUTTON

OPERATION LED

(2) MODE BUTTON

(4) FAN

BUTTON

(1) ON/OFF

BUTTON

(3)