Cisco 7609 설치 - 페이지 17

{카테고리_이름} Cisco 7609에 대한 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7609 22 페이지. Internet router
Cisco 7609에 대해서도 마찬가지입니다: 브로셔 (8 페이지), 데이터시트 (5 페이지), 자주 묻는 질문 (5 페이지), 사용자 설명서 (28 페이지)

페이지 인쇄
Cisco 7609 설치
Chapter 3
Installing the Cisco 7609 Internet Router
To connect a terminal using a Catalyst 5000 family Supervisor Engine III console
cable, perform these steps:
Place the console port mode switch in the out position.
Step 1
Connect to the port using the Supervisor Engine III cable and the appropriate
Step 2
adapter for the terminal connection.
Position the cable in the cable guide (if installed). Make sure there are no sharp
Step 3
bends in the cable.
Check the terminal documentation to determine the baud rate. The baud rate of
Step 4
the terminal must match the default baud rate (9600 baud) of the console port. Set
up the terminal as follows:
•
•
•
•
To connect a modem to the console port, perform these steps:
Place the console port mode switch in the in position.
Step 1
Connect to the port using the RJ-45-to-RJ-45 rollover cable and the
Step 2
RJ-45-to-DB-25 DCE adapter (labeled "Modem").
Position the cable in the cable guide (if installed). Make sure there are no sharp
Step 3
bends in the cable.
OL-5079-04
9600 baud
8 data bits
No parity
2 stop bits
Attaching the Interface Cables
Cisco 7609 Internet Router Installation Guide
3-17