Cisco 7609 설치 - 페이지 4

{카테고리_이름} Cisco 7609에 대한 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7609 22 페이지. Internet router
Cisco 7609에 대해서도 마찬가지입니다: 브로셔 (8 페이지), 데이터시트 (5 페이지), 자주 묻는 질문 (5 페이지), 사용자 설명서 (28 페이지)

페이지 인쇄
Cisco 7609 설치
Installing the Rack-Mount Kit
Note
Caution
Required Tools
Installing the Shelf and Crossbar Brackets
Step 1
Step 2
Step 3
Step 4
Cisco 7609 Internet Router Installation Guide
3-4
Chassis height is measured in rack units (RU).
If the rack is on wheels, ensure that the brakes are engaged or that the rack is
otherwise stabilized.
This kit is not suitable for use with racks with obstructions (such as a power strip)
that could impair access to field-replaceable units (FRUs).
These tools and equipment are required to install the rack-mount kit:
•
Number 1 and number 2 Phillips-head screwdrivers
3/16-inch flat-blade screwdriver
•
Tape measure and level
•
To install the shelf and crossbar brackets, perform these steps:
Position one of the two shelf brackets in the rack as shown in
Secure the shelf bracket to the rack by using three 12-24 x 3/4-inch or
10-32 x 3/4-inch screws.
Repeat Steps 1 and 2 for the second shelf bracket. Make sure that the second shelf
bracket is level with the first bracket.
Attach the crossbar bracket to the back of the shelf brackets using two M3 screws
as shown in
Figure
3-2.
Chapter 3
Installing the Cisco 7609 Internet Router
Figure
3-1.
OL-5079-04