Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base 매뉴얼 - 페이지 10
{카테고리_이름} Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base 11 페이지. Installing the controller
Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (23 페이지)
페이지 인쇄
Accessing the System BIOS
The only supported method to update the firmware is using the Cisco Host Upgrade Utility.
Accessing the System BIOS
You can change the BIOS settings for your controller. Detailed instructions are also printed on the BIOS
screens.
Step 1
Enter the BIOS setup utility by pressing the F2 key when prompted during bootup.
Note
The version and build of the current BIOS are displayed on the Main page of the utility.
Step 2
Use the arrow keys to select the BIOS menu page.
Step 3
Highlight the field to be modified by using the arrow keys.
Step 4
Press Enter to select the field that you want to change, and then modify the value in the field.
Step 5
Press the right arrow key until the Exit menu screen is displayed.
Step 6
Follow the instructions on the Exit menu screen to save your changes and exit the setup utility (or Press F10). You can
exit without saving changes by pressing Esc.
Installing the Controller
10
Installing the Controller