Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base 매뉴얼 - 페이지 2

{카테고리_이름} Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base 11 페이지. Installing the controller
Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (23 페이지)

페이지 인쇄
Cisco 8540 - Catalyst Campus Switch Router Modular Expansion Base 매뉴얼

Preparing for Controller Installation

Step 1
Remove the controller from its container and save all packaging material.
Step 2
Compare the shipment to the equipment list provided by your customer service representative. Verify that you have all
items.
Step 3
Check for damage and report any discrepancies or damage to your customer service representative. Have the following
information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation
Preparing for Controller Installation
This section provides information about preparing for controller installation.
Installation Guidelines
Warning
Read the installation instructions before using, installing or connecting the system to the power source.
Statement 1004
Warning
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the
protective device is rated not greater than: 20A. Statement 1005
Warning
The plug-socket combination must be accessible at all times, because it serves as the main disconnecting
device. Statement 1019
Warning
A readily accessible two-poled disconnect device must be incorporated in the fixed wiring. This is applicable
to systems with DC power supply only. Statement 1022
Warning
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence
of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician
if you are uncertain that suitable grounding is available. Statement 1024
Installing the Controller
2
Installing the Controller