Cisco ACIP-SM= 설치 및 구성 매뉴얼 - 페이지 30

{카테고리_이름} Cisco ACIP-SM=에 대한 설치 및 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ACIP-SM= 33 페이지. Atm cable interface processor (acip)

Examples of ATM Error Messages

Following is a list of possible error messages displayed when you enter the debug atm errors

command:

Error Message

AIP_love_note(ATM2/0): UNKNOWN asr=0x0000

Explanation

Error Message

AIP_setup_vc(ATM2/0): TIQ err. VC 1 peak 1000 avg. 1 rateq rate 2

Explanation

conﬁgured on the ACIP. The average rate is far too low compared to the peak rate.

Error Message

AIP_setup_vc(ATM2/0): CQ err. VC 1 CQ=2048 MTU=256000

Explanation

by the ACIP. In the case of PVCs, the parser catches these. The error message indicates SVC

violations are out of range.

Error Message

AIP_setup_vc(ATM2/0): Return value 0

Explanation

Error Message

AIP_teardown_vc(ATM2/0): Return value 0

Explanation

Error Message

ATM(ATM2/0): Conﬁg. scaler error. RateQ 1, rate 1

Explanation

catch most of these.

Error Message

AIP_raw_input(ATM2/0): bad OAM type 0xaaaa

Explanation

Error Message

AIP_raw_input(ATM2/0): bad OAM function 0xaaaa

Explanation

F4 SEGMENT

F4 END-to-END

F5 SEGMENT

F5 END-to-END

30 ATM Cable Interface Processor (ACIP) Installation and Conﬁguration

A bad love note message was passed back by the ACIP.

Indicates that a VC SETUP failed because the average rate requested could not be

This error message indicates that the cell quota selected is out of the range allowed

The return value from the ACIP after a setup request.

The PVC teardown return code from the ACIP. 0 = Success.

Indicates that the rate speciﬁed for the peak rate is not allowable. The parser should

The RSP received an OAM cell with an invalid OAM type value.

The function value in the OAM cell is invalid in one of the following: