Cisco Aironet 1430 Series 시작하기 매뉴얼 - 페이지 22

{카테고리_이름} Cisco Aironet 1430 Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1430 Series 48 페이지. Wireless bridge

Use a Phillips screw driver to remove grounding post screw on the low-profile mounting

Step 4

bracket.

Attach the wire to a suitable grounding O-ring lug.

Step 5

Crimp or solder the wire to the lug.

Step 6

Insert the grounding post screw into the O-ring lug and reinstall it on the low-profile

Step 7

mounting plate as shown in Figure 6.

Figure 6

Use a Phillips screw driver to tighten the grounding post screw.

Step 8

Troubleshooting

If you follow the instructions in previous sections of this guide, you should have no trouble getting

your bridge installed and running. If you do experience difficulty, before contacting Cisco, look for a

solution to your problem in this guide or the troubleshooting chapter of the hardware installation

guide for the bridge you are using. These, and other documents, are available on Cisco.com. Follow

these steps to access and download these documents:

Open your web browser and go to http://www.cisco.com.

Step 1

THIRD FCC DRAFT (CISCO CONFIDENTIAL)