Cisco Aironet 1430 Series 시작하기 매뉴얼 - 페이지 28

{카테고리_이름} Cisco Aironet 1430 Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1430 Series 48 페이지. Wireless bridge

페이지 인쇄

Table 8

Power Injector LED Indications

Uplink Activity

Injector Status

—

Off

—

Green

—

Blinking Green

—

Amber

—

Green

—

Blinking Green

THIRD FCC DRAFT (CISCO CONFIDENTIAL)

Ethernet Activity Description

Off

Green

Blinking Green

Amber

—

Wired LAN Ethernet link is not active.

Wired LAN Ethernet link is operational.

Transmitting and receiving packets over the

wired LAN Ethernet link.

Power injector internal memory

error—disconnect and reconnect the power

injector power plug. If the problem continues,

contact technical support for assistance.

Link between power injector and bridge is not

active. This might be caused by improper

connections or a defective cable or connector.

Verify that the dual-coax cables are connected

correctly to the power injector, grounding

block, and bridge. If the cables are connected

correctly, contact technical support for

assistance.

Link between power injector and bridge is

operational.

Transmitting and receiving Ethernet packets

between the power injector and the bridge.

Power injector internal memory

error—disconnect and reconnect the power

injector power plug. If the problem continues,

contact technical support for assistance.

Bridge successfully passed Power On Self Test

(POST) and loaded the IOS image.

Bridge power is active and the bridge is loading

IOS image or POST operation has started.