Sony NEX-C3A 기능 설명서 - 페이지 5

{카테고리_이름} Sony NEX-C3A에 대한 기능 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony NEX-C3A 7 페이지. Dslr cameras and lenses for dslr camera
Sony NEX-C3A에 대해서도 마찬가지입니다: 브로셔 및 사양 (7 페이지), 사양 (35 페이지), 제한 보증 (1 페이지)

페이지 인쇄

AF Micro Adj./amount/Clear

Allows you to adjust and register an autofocused position for each lens, when using an

A-mount lens with the LA-EA2 Mount Adaptor (sold separately).

1 [Menu] t [Setup] t [AF Micro Adj.] t [On].

2 [Menu] t [Setup] t [amount] t desired value t OK.

AF Micro Adj.

amount

Clear

Notes

• It is recommended that you adjust the position under actual shooting conditions.

• When you attach a lens for which you have already registered a value, the registered value appears on the

screen. [±0] appears for lens for which a value has yet to be registered.

• If [–] appears, more than 30 lenses have been registered. If you want to register another lens, you must

first clear a value. Attach a lens of the value to be cleared and select [±0]. If you want to clear all

registered values, select [Clear].

• Use [AF Micro Adj.] with Sony, Minolta, and Konika-Minolta lenses only. If you use [AF Micro Adj.]

with other brands of lenses, the registered value may be affected.

• You cannot set [AF Micro Adj.] individually for a Sony, Minolta, and Konika-Minolta lens of the same

specification.

Sets whether or not to use the [AF Micro Adj.] function. Select [On] to

use it. (The default setting is [Off].)

Allows you to select an optimum value between –20 and +20.

Selecting a larger value shifts the autofocused position away from the

camera. Selecting a smaller value shifts the autofocused position

closer to the camera.

Clears the value you set.