DIGITEN DTC-101 매뉴얼 - 페이지 8

{카테고리_이름} DIGITEN DTC-101에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DIGITEN DTC-101 10 페이지.

preset delay time, the equipment will start refrigeration immediately; when the

time interval between two refrigeration operations is less than preset delay

time, the equipment won't start refrigeration until achieve the preset delay time.

Delay time will be recorded at the moment that refrigeration stops.

5.Temperature Calibration (CA)

When there is deviation between current temperature and actual temperature,

use temperature calibration function to correct the current temperature and

actual temperature. Corrected Temperature = Temperature (before Calibration)

+Corrected Value (corrected value could be positive value, 0 or negative

value).

6.Display in Fahrenheit or Centigrade unit (CF)

Users can select display with Fahrenheit or Centigrade temperature value

according to their own habit. Default setting is display with Centigrade

temperature value.

Press

and SET buttons simultaneously about 3 seconds until the symbol

disappears, the LCD light will shut off automatically after 30 seconds.

Press

and SET buttons simultaneously about 3 seconds until the LCD

appears

, the LCD will be stay on.

The thermostat can be used to control a wide variety of dual-stage refrigeration

and heating, or HVAC equipment. Typical applications include:

●Retail store display freezers and coolers

●Supermarket display cases for product/meats

●Retail store walk-in freezers and coolers

●Boiler operating control

●Condenser fan cycling or staging

●Cooling tower pump and fan control

●Space and return air temperature control

●Aquarium water temperature

●BBQ

●Over temperature control/protection

-6-