Sony NEX52LENSBDL 기능 설명서 - 페이지 3

{카테고리_이름} Sony NEX52LENSBDL에 대한 기능 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony NEX52LENSBDL 7 페이지. New functions provided by firmware update 04
Sony NEX52LENSBDL에 대해서도 마찬가지입니다: 사양 (2 페이지), 기능 설명서 (7 페이지), 3D 지침 (9 페이지), 사양 (35 페이지), 제한 보증 (1 페이지), 기능 설명서 (6 페이지)

페이지 인쇄

Customizing soft key C

Pressing soft key C will activate [Shoot Mode] in the default setting. You can assign

either 3 of the following functions instead to use them by pressing soft key C.

Autofocus Area/ISO/White Balance/Metering Mode/FlashCompensation/DRO/Auto

HDR/Creative Style

1 [Menu] t [Setup] t [Soft key C Setting] t [Custom].

2 [Menu] t [Setup] t Assign a function to [Custom 1], [Custom 2], or

[Custom 3].

You do not need to set functions for 1, 2, and 3 all at once.

In the default setting, [Custom 1] is assigned to [ISO], [Custom 2] to [White Balance],

and [Custom 3] to [DRO/Auto HDR].

Using the newly assigned function

You can use the function you just assigned to soft key B or C as follows.

Soft key B:

1 When the assigned function is

displayed at the lower right corner of

the screen, press soft key B.

Soft key C:

1 When [Custom] is displayed, press soft

key C.

2 Select [Custom 1/2 /3] by pressing the

right or left side of the control wheel.

Note

• You can use the assigned function only in P (Program Auto), A (Aperture Priority), S (Shutter Priority),

and M (Manual Exposure) shooting modes.

Soft key C

Soft key B