DIGITEN DTC-102 매뉴얼 - 페이지 9

{카테고리_이름} DIGITEN DTC-102에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DIGITEN DTC-102 10 페이지.

Application

The DTC-102 thermostat can be used to control a wide variety of dual-stage refrigeration and

heating, or HVAC equipment, Typical applications include：

Retail store display freezers and coolers

•

Supermarket display cases for product/meats

•

Retail store walk-in freeze and coolers

•

Boiler operating control

•

Condenser fen cycling or staging

•

Cooling tower pump and fan control

•

Space and return air temperature control

•

Aquarium water temperature

•

BBQ

•

Over temperature control/protection

•

If you have a problem with thermostat, there's usually a quick and simple solution.

Green LED flash when power on

It is a normal phenomenon, Delay Starting Protection function for Refrigerating Compressor is

working. Now PV(current temperature) is higher or equal to Csp(Cooling Start Point), you could

enter Setup Mode directly, or wait 3 minutes until it doesn't flash green light before setting the

temperature controller.

Err Alarm

When temperature sensor is in short-circuited or open-circuited, the controller will prompt

sensor fault mode, and cancel all the actions. The buzzer will alarm, and LCD displays Err.

Buzzer alarm could be dismissed by pressing any key. After faults solved, the system will return

to normal working mode.

HL Alarm

When current temperature exceeds the measuring range (less than -40 ℃ /-40 ℉ or higher than

120 ℃/248 ℉), the controller will prompt over-temperature alarm mode, and cancel all the

actions. The buzzer will alarm, LCD displays HL. Buzzer alarm could be dismissed by pressing

any key. When temperature returns to measuring range, the system will return to normal

working status.

- 7 -