Sony SLT-A55V - alpha; Translucent Mirror Technology™ Dslr 서비스 매뉴얼 - 페이지 26
{카테고리_이름} Sony SLT-A55V - alpha; Translucent Mirror Technology™ Dslr에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SLT-A55V - alpha; Translucent Mirror Technology™ Dslr 30 페이지. Interchangeable lens digital camera/zoom lens kit
Sony SLT-A55V - alpha; Translucent Mirror Technology™ Dslr에 대해서도 마찬가지입니다: 기능 설명서 (7 페이지), 사양 (2 페이지)
페이지 인쇄
Assembly-1: Method of attachment of
LCD-021 Flexible Board
1-1.
Fold dotted line parts of the LCD-021 Flexible Board as
shown in figure.
Valley fold
Adhesive tape
Mountain fold
1-2. Peel off the released paper of double-coated adhesive tape
on the B side, and then attach it to the A side without covering
the boss hole. (3 places)
Peel off the released paper of double-coated adhesive tape
on the C side, and then attach it to the A side without covering
the boss hole. (3 places)
A
A
A
B
C
B
C
B
C
SLT-A33/A33L/A33Y/A55/A55V/A55L/A55VL/A55VY_L2
1-3. Peel off the released paper of double-coated adhesive tape,
and then fold dotted line parts of the LCD-021 Flexible Board
as shown in figure.
Adhesive tape
Adhesive tape
Adhesive tape
3. ASSEMBLY
1-4.
Attach the CV LCD Hinge Cover (C) to the CV LCD Hinge Assy,
and then attach the LCD-021 Flexible Board as shown in figure.
CV LCD Hinge Assy
CV LCD Hinge Cover (C)
1-5.
1�Attach the CV LCD Hinge Cover (M), and then rotate
the CV LCD Hinge Assy by 90°.
2�Tighten one "#2: M1.7 X 4.0" screw.
3�Rotate the CV LCD Hinge Assy by
the original position.
CV LCD Hinge Cover (M)
1-6.
Attach the LCD-021 Flexible Board as shown in figure.
3-1
1-7.
1�Connect the LCD-021 Flexible Board to the connector of
the PD-414 Complete Board, and attach it to the boss hole.
2�Attach the EM PD Ground Plate and tighten one
"#11: M1.7 X 4.0 (Tapping)" screw.
1-8.
1�Attach the CV P Cabinet (C), and then rotate
the CV LCD Hinge Assy by
2�Tighten the two "#2: M1.7 X 4.0" screws.
90°
to return it to
CV P Cabinet (C)
1-9.
Wrap the LCD-021 Flexible Board around the CV LCD
Hinge Assy by rotating it one circle as shown in figure.
PD-414 Complete Board
EM PD Ground Plate
90°
as shown in figure.