Sony SLT-A58K 서비스 매뉴얼 - 페이지 7
{카테고리_이름} Sony SLT-A58K에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SLT-A58K 26 페이지. Interchangeable lens digital camera
Sony SLT-A58K에 대해서도 마찬가지입니다: 제한 보증 (1 페이지), 사양 (6 페이지)
페이지 인쇄
1-7. METHOD FOR REPLACING THE AS SLIDER B ASSY T
Removal Procedure
(1) Remove the spring.
Spring
(2) Remove the solder on the enamel wires at two places.
Solder
Solder
(3) Remove the flexible board from the AS Slider B Assy T.
Flexible Board
(4) Remove the two screws.
(5) Remove the AS Unit Holder Ball.
AS Unit Holder Ball
(6) Remove the two Ball Bearings.
Ball Bearing
Ball Bearing
SLT-A58K/A58M/A58Y_L2
(7) Remove the Cap SPs (for Pitch and Yaw).
Cap SP
(8) Remove the Caps (for Pitch and Yaw).
Cap
(9) Remove the AS Slider A Assy.
It can be done easily if A is removed beforehand.
A
AS Slider A Assy
(10) Remove the AS Slider B Assy T.
It can be done easily if B is removed beforehand.
B
AS Slider B Assy T
(11) Remove the three Ball Bearings.
Ball Bearings
Assembly Procedure
Note: Make sure to perform the assembly procedures after assembling the AS Holder Actuator Assy.
The assembly procedure is the reverse of the removal procedure.
Apply grease to the portions indicated below.
* After applying grease, attach the Ball Bearings.
Ball Bearings
G G-15
G G-15 and G G-116
AS Slider B Assy T
* After applying grease, attach the Ball Bearings.
Ball Bearing
G G-15
Ball Bearing
G G-15
1-4