Sony SRG-201M2 매뉴얼 - 페이지 12

{카테고리_이름} Sony SRG-201M2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony SRG-201M2 15 페이지. Srt introduction
Sony SRG-201M2에 대해서도 마찬가지입니다: 명령 목록 (41 페이지), 기술 매뉴얼 (15 페이지)

페이지 인쇄

Manufacturer: Sony Imaging Products & Solutions Inc.

Model: BRC-X400/SRG-X series

Device Type: Camera

In the new UDP/IP communications, put "52381d" that is UDP port number of controlling VISCA over IP

protocol. Select all the three signals using [Ctrl] + mouse-click and then press [F9] to prompt 'Search and

Replace' dialog box. Put "_2" and "_3" (in case of 3rd camera addition) in the upper 2 edit boxes and then

press [OK] to correct the signal names. Repeat the same operation towards newly created UDP/IP

communication objects.

4. Addition of signals under S-3: CameraSelect Logic

Expand S-3: CameraSelect logic and then display all the objects in Detail View. Add respective signals whose

signal name contain numerical suffix by pressing [Alt] + [+] button.

15 Volvo Drive · Rockleigh, NJ 07647

800.237.2041 / 201.767.3400

Figure 5: Signal name correction using Substring replace

[email protected]. The information contained on this document is privileged

and confidential and for use by Crestron Authorized Dealers, CSP Members, A+ Partners

and Certified Integrated Partners only. Specifications subject to change without notice.

http://application.market.com

For more information please contact our Crestron Application Market team at