Sony XCL-CG510C 기술 매뉴얼 - 페이지 22

{카테고리_이름} Sony XCL-CG510C에 대한 기술 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony XCL-CG510C 48 페이지. Digital video camera module

페이지 인쇄

1. Features

Bulk

SP-TRG-MODE=1, SP-TRG-POL=0, SP-TRG-F-CNT=3 in the figure.

Sequential

SP-TRG-MODE=2, SP-TRG-POL=0, SP-TRG-F-CNT=3 in the figure.

Burst trigger

Exposure can be repeated continuously with one trigger signal. Modes with repeating single exposure time and with

repeating two exposure times alternately are available. The number of times of exposer can be specified.

Parameter

TRG-BST-MODE

TRG-BST-F-CNT

0-65533

TRG-BST-STOP

EXP2-TIME

1-60000000

EXP2-RAT

1, 2, 4, 8, 16

Trigger signal

Exposure

Sensor output

Setting 1

Trigger signal

Exposure

Sensor output

Setting 1

Single Exposure Time mode

Upon trigger edge detection

Upon trigger width detection

Dual Exposure Time mode

Upon trigger edge detection

Upon trigger width detection

0: repeat infinitely

1 and above: exposure for specified times

Force terminate repeating exposure

The secondary exposure time upon trigger edge detection

The value to determine the secondary exposure time upon trigger edge detection. The primary

exposure time (trigger width) multiplied by this value will be the secondary exposure time.

Setting 2

5 ms or

longer

Setting

Exposer for the time set on EXP.

Exposer for only the width of trigger.

Exposer for the time set on EXP and EXP2-TIME

alternately.

Exposure for trigger width, trigger width × time set on

EXP2-RAT alternately.

Setting 3