Sony XDCAM EX PMW-EX3 시작하기 - 페이지 8

{카테고리_이름} Sony XDCAM EX PMW-EX3에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony XDCAM EX PMW-EX3 9 페이지. Solid-state memory camcorder
Sony XDCAM EX PMW-EX3에 대해서도 마찬가지입니다: 브로셔 및 사양 (35 페이지), 브로셔 (24 페이지), 브로셔 및 사양 (6 페이지), 브로셔 및 사양 (35 페이지), 서비스 매뉴얼 (24 페이지), 지침 (2 페이지)

페이지 인쇄

Status

Verifying the

communication status

between the computer

and PMW-EX1/EX3

(see page 5)

Verifying the power

source of the PMW-

EX1/EX3 (see page 5)

Verifying the model

information (see page

Message

There is an error in the connection order

of the device.

Please switch off the connected device,

and repeat the upgrade from the

beginning.

Please set the power switch on the

device to the CAMERA positon after

connecting the device to the PC with the

USB cable.

Push the [OK] button to exit the upgrade

tool.

A communication error occurred.

Please switch off the connected device,

and repeat the upgrade from the

beginning.

Push the [OK] button to exit the upgrade

tool.

An unexpected error occurred.

Please switch off the connected device,

and repeat the upgrade from the

beginning.

Push the [OK] button to exit the upgrade

tool.

The connected device is operating on

battery.

Please connect an AC adapter, and

push the [Retry] button.

Please push the [Exit] button to exit the

upgrade.

Failed to acquire the power supply type.

Please switch off the connected device,

and repeat the upgrade from the

beginning.

Push the [OK] button to exit the upgrade

tool.

The connected device has already been

upgraded.

Press [Exit] to exit the upgrade tool.

The model name does not match the

name of the connected device.

Please use the upgrade tool

corresponding to the connected device.

Push the [OK] button to exit the upgrade

tool.

Failed to acquire the power supply type.

Please switch off the connected device,

and repeat the upgrade from the

beginning.

Push the [OK] button to exit the upgrade

tool.

Location of Message

Message box

Status/message display

area

Message box

Status/message display

area

Message box

Remedy

Turn off the power of the

PMW-EX1/EX3, and re-

connect it to the computer

(see page 1).

Turn off the power of the

PMW-EX1/EX3, and re-

connect it to the computer

(see page 1).

Turn off the power of the

PMW-EX1/EX3, and repeat

the procedure from the

beginning.

Turn off the power of the

PMW-EX1/EX3, and

connect it to an AC power

source.

Turn off the power of the

PMW-EX1/EX3, and

connect it to an AC power

source.

There is no need to perform

an upgrade.

Reinstall the appropriate

Version Up Tool file (see

page 4).

Turn off the power of the

PMW-EX1/EX3, and repeat

the procedure from the

beginning.