Cisco Aironet 350 Series 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Cisco Aironet 350 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 350 Series 12 페이지. Managed switches
Cisco Aironet 350 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지), 릴리스 정보 (14 페이지), 빠른 시작 매뉴얼 (16 페이지), 빠른 시작 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (10 페이지), 자세히 알아보기 (16 페이지), 빠른 시작 매뉴얼 (5 페이지)

3 Associate an IP Address With the Bridge (continued)

Finding the DHCP-Assigned IP Address

If your bridge receives an IP address from a DHCP server, use IPSU to determine the IP address.

Double-click the IPSU icon on your computer desktop to start IPSU. The following screen

Step 1

appears:

In the Device MAC ID field, enter the MAC address as it appears on the label on the bottom

Step 2

of the bridge. It should contain six pairs of hexadecimal digits. For example, your bridge's

MAC address might look like this: 00409625854c

Step 3

Make sure Get IP addr is selected in the Function box; click the Get IP Address button.

Write down the number that is displayed in the IP Address field. If IPSU reports that the IP

Step 4

address is 10.0.0.1, the default IP address, then the bridge did not receive a DHCP-assigned

IP address. Follow the instructions in the "Setting the Bridge's IP Address and SSID" section

below to set the IP address.

Setting the Bridge's IP Address and SSID

If your bridge does not receive an IP address from a DHCP server or if you want to set a static IP

address for the bridge, use IPSU to assign the IP address. You can set the bridge's SSID at the same time.

Note The computer you use to assign an IP address to the bridge must have an IP address

of its own.