Sony CMT HPZ7 사용 설명서 - 페이지 30

{카테고리_이름} Sony CMT HPZ7에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony CMT HPZ7 40 페이지. Micro hi-fi component system
Sony CMT HPZ7에 대해서도 마찬가지입니다: 사용 설명서 (40 페이지), 사용 설명서 (40 페이지)

페이지 인쇄

Troubleshooting

Problems and remedies

Should you encounter a problem with your

system, do the following:

Make sure the power cord and speaker

cords are correctly and firmly connected.

Find your problem in the troubleshooting

checklist below and take the indicated

corrective action.

If the problem persists after doing all of the

above, consult your nearest Sony dealer.

When the STANDBY indicator

flashes

Immediately unplug the power cord and

check the following items.

• If your system has a voltage selector, is the

voltage selector set to the correct voltage?

Check the voltage for your region, then

make sure the voltage selector is set

correctly.

• Are the + and – speaker cords short-

circuited?

• Are you using the supplied speakers?

• Is anything blocking the ventilation holes

on the rear of the system?

Check all the above items and fix any

problems found. After STANDBY indicator

stops flashing, reconnect the power cord and

turn on the system. If the indicator still

flashes, or if the cause of the problem cannot

be found even after checking all the above

items, consult your nearest Sony dealer.

General

"CANT LOCK" appears.

• Turn the power off and then on again by pressing

?/1 on the system, then perform "When carrying

this system" (page 12). If "CANT LOCK" still

appears, contact your Sony dealer or local

authorized Sony service facility.

"– –:– –" appears in the display.

• A power interruption has occurred. Set the clock

(page 12) and timer settings (pages 24 and 25)

again.

The clock setting/radio presetting/timer is

canceled.

• Redo the following:

– "Setting the clock" (page 12)

– "Presetting radio stations" (page 18)

– "Waking up to music" (page 24)

– "Timer recording radio programs" (page 25)

There is no sound.

• Press VOLUME + or turn VOLUME control on

the unit clockwise.

• Make sure the headphones are not connected.

• Check the speaker connections (page 10).

• There is no audio output during Rec Timer.

Sound comes from one channel, or

unbalanced left and right volume.

• Place the speakers as symmetrically as possible.

• Connect the supplied speakers.

There is severe hum or noise.

• Move the system away from the source of noise.

• Connect the system to a different wall outlet.

• Install a noise filter (commercially available) to

the power cord.

The timer cannot be set.

• Set the clock again (page 12).

The timer does not function.

• Check the timer setting and set the correct time

(pages 24 and 25).

• Cancel the Sleep Timer function (page 23).

• Make sure the clock is correctly set (page 12).

The color irregularity on a TV screen persists.

• Turn off the TV set once, then turn it on after 15

to 30 minutes. If the color irregularity still

persists, place the speakers farther away from the

TV set.