Sony CMT-CP100K 서비스 매뉴얼 - 페이지 12
{카테고리_이름} Sony CMT-CP100K에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony CMT-CP100K 50 페이지. Micro hifi component system
Sony CMT-CP100K에 대해서도 마찬가지입니다: 서비스 매뉴얼 (2 페이지)
페이지 인쇄
HCD-CP100/CP100K
[Cold Reset]
• The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning
the set to the customer.
Procedure:
1. Turn ON the power.
2. Press three buttons
x
simultaneously.
3. The set is reset.
[Liquid Crystal Display All Lit Check Mode]
Procedure:
1.
Set to standby state.
2.
Press three buttons of
x
[TUNING MODE]
simultaneously.
3.
Liquid crystal display are all turned on.
4.
To exit from this mode, press the
OFF.
[Tape Deck Aging Mode]
This mode can be used for operation check of tape deck section.
Procedure:
1.
Set a tape in the tape deck.
2.
Set to standby state.
3.
Press three buttons of
x
simultaneously.
4.
The aging is executed in bellow sequence.
5.
To exit from the aging mode, press the
power OFF.
Aging mode sequence:
Start
FWD Play
1 minute
REC pause for 3 seconds
FWD REC
3 minutes
Fast forward
REV Play
1 minute
REC pause for 3 seconds
REV REC
3 minutes
Rewind
12
SECTION 4
TEST MODE
[BAND]
(TAPE),
(CD), and
x
(TAPE),
x
(CD), and
button to turn the power
I/1
[TUNING +]
(TAPE),
(CD), and
x
button to turn the
I/1
Shut off
Shut off
Shut off
Shut off
[CD Aging Mode]
This mode can be used for operation check of CD section.
Procedure:
1.
Load a CD disc.
2.
Set to standby state.
3.
Press three buttons of
x
simultaneously.
4.
The aging is executed in bellow sequence.
5.
To exit from the aging mode, press the
power OFF.
Aging mode sequence:
Start
Open the disc tray
Close the disc tray
Play the last track
[TUNING --]
(TAPE),
(CD), and
x
button to turn the
I/1