Sony CMT-CP11 사용 설명서 - 페이지 29

{카테고리_이름} Sony CMT-CP11에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony CMT-CP11 36 페이지. Micro hifi component system
Sony CMT-CP11에 대해서도 마찬가지입니다: 서비스 매뉴얼 (45 페이지), 사용 설명서 (36 페이지)

페이지 인쇄

Before

placing

a cassette

the

tape

deck

Take up any slack in the tape. Otherwise

the tape may

get entangled

in the tape deck's

playing mechanism

and become

damaged.

When using

a tape

longer than

90 minutes

The tape is very elastic. Do not change the tape

operations such as play, stop, and fast-winding etc.

too frequently. The tape may get entangled in the tape

deck's playing mechanism.

Cleaning

the

tape

heads

Clean the tape heads after every l0 hours of use.

When the tape heads become dirty

the sound becomes

distorted

the sound level decreases

the sound drops out

the tape does not erase completely

the tape does not record

Make sure to clean the tape heads before

making

important

recording or after

playing

old tape. Use

a commercially

available

dry-type

or wet-type

cleaning cassette. For details, refer to the instructions

of the cleaning cassette.

Demagnetizing

the

tape

heads

Demagnetize

the tape heads and the metal parts that

have contact

with the tape after every 20 to 30 hours

of use with a commercially available demagnetizing

cassette. For details, refer to the instructions of the

demagnetizing

cassette.

Cleaning

the

cabinet

Clean the cabinet,

panel and controls

with a soft cloth

slightly

moistened

with mild detergent

solution.

not use any type of abrasive pad, scouring powder or

solvent such as thinner, benzene or alcohol.

Troubleshooting

Should you encounter

a problem with your

system, do the lbllowing:

7 Make sure the power cord and speaker cords

are correctly and firmly connected.

2 Find your problem in the troubleshooting

checklist below and take the indicated

corrective action.

If the problem persists after doing all of the above,

consult your nearest Sony dealer.

General

There is no sound from the speakers.

• Adjust VOLUME.

• The headphones

are connected.

• Check the speaker connections.

There is severe hum or noise.

• A TV or VCR is placed too close to the unit.

Move the unit away from the TV or VCR.

"0:00"

(or "AM 12:00")

flashes

in the

display.

• A power interruption

has occurred. Set the

clock (see page 6) and timer settings (see

pages 25 and 26) again.

The timer does not function.

• Make sure the clock is correctly set (see page

6).

"Q DAILY" and "Q REC" do not appear

when you press TIMER SELECT

on the

remote.

• Make sure each timer is correctly set (see

pages 25 and 26).

• Make sure the clock is correctly set (see page

6).

The color on the TV screen is irregular.

• Move the speakers farther away from the TV

set.

7-,"

continued