Sony CMT-CQ1 - Micro Hi Fi Component System 사용 설명서 - 페이지 9
{카테고리_이름} Sony CMT-CQ1 - Micro Hi Fi Component System에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony CMT-CQ1 - Micro Hi Fi Component System 24 페이지. Using cd power manage function
Sony CMT-CQ1 - Micro Hi Fi Component System에 대해서도 마찬가지입니다: 보충 설명서 (1 페이지)
페이지 인쇄
5
Press ENTER.
6
Repeat steps 1 through 5 to preset
other stations.
Tip
Press TUNING MODE to stop scanning.
Manual tuning preset
You can manually tune in and store the radio
frequency of the desired stations.
1
Press TUNER BAND repeatedly to
select FM or AM.
2
Press TUNING MODE repeatedly until
"AUTO" and the preset number
disappear from the display.
3
Press TUNING +/– repeatedly to tune in
the desired station.
4
Press TUNER MEMORY.
The preset number flashes. The stations are
stored from preset number 1.
5
Press ENTER.
6
Repeat steps 1 through 5 to preset
other stations.
Other Operations
To
Do this
Tune in a station
Follow the procedure described
with a weak signal
in "Manual tuning preset"
(page 9).
Set another station
After step 4, press TUNING +/–
to the existing
repeatedly to select the preset
preset number
number you want to store the
station and then press ENTER.
To change the AM tuning interval
(except for European and Middle
Eastern models)
The AM tuning interval is factory-preset to 9
kHz (or 10 kHz for some areas). To change the
AM tuning interval, tune in any AM station first,
then turn off the system. While holding >,
press ?/1. When you change the interval, all the
AM preset stations are erased. To reset the
interval, tune in any AM station first, then turn
off the system. While holding >, press ?/1.
Note
You cannot change the AM tuning interval in the
Power Saving Mode.
Tips
• The preset stations are retained for about a day even
if you disconnect the power cord or if a power failure
occurs.
• To improve the reception, adjust the supplied
antennas or connect an external antenna.
GB
9