Sony CMT-EP305 사용 설명서 - 페이지 19
{카테고리_이름} Sony CMT-EP305에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony CMT-EP305 20 페이지. Micro hi-fi component system
Sony CMT-EP305에 대해서도 마찬가지입니다: (포르투갈어) 사용 설명서 (20 페이지)
페이지 인쇄
To save a tape permanently
To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
illustrated.
Break off the
cassette tab of
side A
If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.
Before placing a cassette in the tape
deck
Take up any slack in the tape. Otherwise the tape may
get entangled in the parts of the tape deck and become
damaged.
When using a tape longer than 90
minutes
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding (etc.)
frequently. The tape may get entangled in the tape
deck.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use.
Make sure to clean the tape heads before you start an
important recording or after playing an old tape. Use
separately sold dry-type or wet-type cleaning cassette.
For details, refer to the instructions of the cleaning
cassette.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of use
with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.
Specifications
Amplifier section
AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 4
loads both channels driven, from 120
- 10,000 Hz; rates 6 W per channel minimum
RMS power, with no more than 10% total
harmonic distortion from 250 mW to rated
output.
Canadian model:
Continuous RMS power output (reference)
European model:
DIN power output (rated) 4.5 + 4.5 W
Continuous RMS power output (reference)
Music power output (reference)
Other model:
The following measured at AC 230 V or AC 120 V,
50/60 Hz
DIN power output (rated) 4.5 + 4.5 W
Continuous RMS power output (reference)
Outputs
PHONES:
(stereo mini jack)
SPEAKER:
CD player section
System
Laser
Frequency response
6 + 6 W
(4
at 1 kHz, 10% THD)
(4
at 1 kHz, DIN)
6 + 6 W
(4
at 1 kHz, 10% THD)
13 + 13 W
(4
at 1 kHz, DIN)
6 + 6 W
(4
at 1 kHz, 10% THD)
Accepts headphones of
8
or more
Accepts impedance of 4 to
16
Compact disc and digital
audio system
Semiconductor laser
( =780 nm)
Emission duration:
continuous
20 Hz - 20 kHz (±0.5 dB)
continued
GB
19