Sony CMT-EP505 - Micro Hi Fi Component System 사용 설명서 - 페이지 22
{카테고리_이름} Sony CMT-EP505 - Micro Hi Fi Component System에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony CMT-EP505 - Micro Hi Fi Component System 24 페이지. Marketing specifications
Sony CMT-EP505 - Micro Hi Fi Component System에 대해서도 마찬가지입니다: 제품 정보 (2 페이지)
페이지 인쇄
Precautions (continued)
Before placing a cassette in the tape
deck
Take up any slack in the tape. Otherwise the tape may
get entangled in the parts of the tape deck and become
damaged.
When using a tape longer than 90
minutes
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding (etc.)
frequently. The tape may get entangled in the tape
deck.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use.
Make sure to clean the tape heads before you start an
important recording or after playing an old tape. Use
separately sold dry-type or wet-type cleaning cassette.
For details, refer to the instructions of the cleaning
cassette.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of use
with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.
GB
22
Specifications
AUDIO POWER SPECIFICATIONS:
(CMT-EP505, U.S.A. model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 8
loads both channels driven, from 120
- 10,000 Hz; rates 14 W per channel minimum
RMS power, with no more than 10% total
harmonic distortion from 250 mW to rated
output.
Amplifier section
Canadian model (CMT-EP505):
Continuous RMS power output (reference)
European model (CMT-EP505):
DIN power output (rated) 11 + 11 W
Continuous RMS power output (reference)
Music power output (reference)
European model (CMT-EP404):
DIN power output (rated) 6 + 6 W
Continuous RMS power output (reference)
Music power output (reference)
Other model (CMT-EP505):
The following measured at AC 230 V or AC 120 V,
50/60 Hz
DIN power output (rated) 11 + 11 W
Continuous RMS power output (reference)
Outputs
PHONES:
(stereo mini jack)
SPEAKER:
14 + 14 W
(8
at 1 kHz, 10% THD)
(8
at 1 kHz, DIN)
14 + 14 W
(8
at 1 kHz, 10% THD)
27 + 27 W
(8
at 1 kHz, DIN)
8 + 8 W
(8
at 1 kHz, 10% THD)
16 + 16 W
(8
at 1 kHz, DIN)
14 + 14 W
(8
at 1 kHz, 10% THD)
Accepts headphones of
8
or more
Accepts impedance of 8 to
16