Cisco ASA 5506-X 간편한 설정 매뉴얼 - 페이지 3

{카테고리_이름} Cisco ASA 5506-X에 대한 간편한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5506-X 11 페이지. Threat defense reimage guide
Cisco ASA 5506-X에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (14 페이지), 소프트웨어 설명서 (37 페이지), 마운트 및 연결 (12 페이지), 설치 매뉴얼 (46 페이지), 섀시 마운트 (10 페이지), 하드웨어 설치 매뉴얼 (26 페이지)

페이지 인쇄
Cisco ASA 5506-X 간편한 설정 매뉴얼
2
Installing ASDM
To configure the ASA, use the Cisco Adaptive Security Device Manager (ASDM).
Follow these steps to download the Cisco ASDM from the ASA and install it to your
PC.
1
2
Caution
If the Cisco ASDM web page does not appear, make sure that:
The POWER LED and STATUS LED are solid green.
・
・ You
connect a straight-through cable to an Ethernet port on the ASA.
Any pop-up blockers or proxy settings on your browser are disabled and that any
・
wireless client is disabled on your PC or laptop.
・ Your PC settings use DHCP. The ASA acts as a DHCP server. If your PC has a static IP ad-
dress, temporarily configure your PC settings to use DHCP.
1
Launch a Web browser PC
and enter the IP address
"
h t t p s : / / 1 9 2 . 1 6 8 . 1 . 1
"
into the address bar, then
press Enter key.
Depending on your environ-
ment, the
security certificate
page appears.
2
Click
［
Continue to this
website (not recommend-
ed)
.
］
The Cisco ASDM web page ap-
pears.
3
Depending on your environ-
ment, the authentication dialog
3
box appears.
4
Leave the username and pass-
word fields empty.
4
5
The InstallShield Wizard for
Cisco ASDM Launcher appears.
5
Cisco ASA with FirePOWER Services Easy Setup Guide
2
Installing ASDM
Click [Install ASDM
Launcher].
Click [OK].
Click [Run].