Cisco ASA 5506-X 소프트웨어 설명서 - 페이지 34

{카테고리_이름} Cisco ASA 5506-X에 대한 소프트웨어 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5506-X 37 페이지. Threat defense reimage guide
Cisco ASA 5506-X에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (14 페이지), 간편한 설정 매뉴얼 (11 페이지), 마운트 및 연결 (12 페이지), 설치 매뉴얼 (46 페이지), 섀시 마운트 (10 페이지), 하드웨어 설치 매뉴얼 (26 페이지)

페이지 인쇄

Reimage the Firepower 2100 to ASA or Firepower Threat Defense

firepower-2110 /firmware/auto-install # install security-pack version 6.3.0-1

The system is currently installed with security software package 9.10.0.1, which has:

- The platform version: 2.5.1.52

- The CSP (asa) version: 9.10.1.1

If you proceed with the upgrade 6.3.0-1, it will do the following:

- upgrade to the new platform version 2.5.1.78

- reimage the system from CSP asa version 9.10.1.1 to the CSP ftd version 6.3.0.1

Do you want to proceed ? (yes/no): yes

This operation upgrades firmware and software on Security Platform Components

Here is the checklist of things that are recommended before starting Auto-Install

(1) Review current critical/major faults

(2) Initiate a configuration backup

Attention:

If you proceed the system will be re-imaged. All existing configuration will be lost,

and the default configuration applied.

Do you want to proceed? (yes/no): yes

Triggered the install of software package version 6.3.0-1

Install started. This will take several minutes.

For monitoring the upgrade progress, please enter 'show' or 'show detail' command.

firepower-2110 /firmware/auto-install #

Step 5

Wait for the chassis to finish rebooting.

FXOS comes up first, but you still need to wait for the ASA/FTD to come up.

After the application comes up and you connect to the application, for FTD you are prompted to accept the

EULA and perform initial setup at the CLI.

For ASA, you access user EXEC mode at the CLI.

Example:

FTD Example: Console

[...]

************ Attention *********

Initializing the configuration database.

system resources (CPU, memory, and disk), this may take 30 minutes

or more to complete.

************ Attention *********

Executing S09database-init

Executing S11database-populate

Cisco FPR Series Security Appliance

firepower login: admin

Password:

Successful login attempts for user 'admin' : 1

[...]

User enable_1 logged in to firepower

Logins over the last 1 days: 1.

Failed logins since the last login: 0.

Type help or '?' for a list of available commands.

Cisco ASA and Firepower Threat Defense Reimage Guide

Depending on available

[

]