Cisco ASA 5506-X 설치 매뉴얼 - 페이지 9

{카테고리_이름} Cisco ASA 5506-X에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5506-X 46 페이지. Threat defense reimage guide
Cisco ASA 5506-X에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (14 페이지), 간편한 설정 매뉴얼 (11 페이지), 소프트웨어 설명서 (37 페이지), 마운트 및 연결 (12 페이지), 섀시 마운트 (10 페이지), 하드웨어 설치 매뉴얼 (26 페이지)

페이지 인쇄
Cisco ASA 5506-X 설치 매뉴얼
Overview
Figure 5: ASA 55-6-X and 5506W-X Rear Panel
1
Status LEDs
The locations and meanings of the status LEDs
are described in
3
Network data ports
Eight Gigabit Ethernet RJ-45 (8P8C) network I/O
interfaces. The ports are numbered (from left to
right) 1, 2, 3, 4, 5, 6, 7, 8. Each port includes a
pair of LEDs, one each for connection status and
link status. The ports are named and numbered
Gigabit Ethernet 1/1 through Gigabit Ethernet
1/8. See
information.
5
Console ports
Two serial ports, a mini USB Type B, and a
standard RJ-45 (8P8C), are provided for
management access via an external system. See
Console Ports, on page 10
information.
Online Only
LEDs, on page
7.
Network Ports, on page 9
for additional
for additional
Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide
2
Power cord socket
The chassis power-supply socket. See
Supply Modules, on page 11
information about the chassis power supply.
Note
The ASA is powered on when you
plug in the AC power supply.
4
Management port
A Gigabit Ethernet interface restricted to network
management access only. Connect with an RJ-45
cable.
6
USB port
A standard USB Type A port is provided that
allows the attachment of an external device, such
as mass storage. See
Internal and External Flash
Storage, on page 11
for additional information.
Rear Panel
Power
for more
5