Sony LBT-G2000 사용 설명서 - 페이지 20
{카테고리_이름} Sony LBT-G2000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony LBT-G2000 23 페이지.
페이지 인쇄bi colelo)(=s-Jaleloy
alate mere tel
Before going through the check list below, first refer back to the connections and
operating procedures.
Should any problem persist after you have made these checks, consult your nearest Sony
service facility.
Symptom
Cause
Remedy
No power.
AC power cord is not connected
Connect the AC power cord securely.
securely.
No sound.
Volume is not turned up.
Turn up the volume.
Wrong connection.
Connect the speaker cords correctly.
Loose connections.
Make connections securely.
Reversed left and right sound.
Wrong connection.
Connect the speaker cords correctly.
Severe hum or noise.
Loose connections.
Make connections securely.
Unit is near TV or VTR.
Move TV or VTR away from the unit.
Symptom
Cause
Remedy
The "TUNED" or "STEREO" indicator
Antenna is not aimed in the right
Adjust the location and direction of the
blinks.
ion.
antenna.
Weak signal.
Connect to an external antenna if the
indication still blinks.
Set the STEREO/MONO button to
MONO.
Severe hum or noise.
Antenna is not aimed in the right
Adjust the location and direction of the
direction.
antenna.
Weak signal.
Connect to an external antenna if hum
or noise still interferes with reception.
Cassette deck
Symptom
Cause
Remedy
You cannot play back a tape.
§§ PAUSE is engaged.
Press the i8 PAUSE button to release
the unit from the pause mode.
You cannot record on a tape.
The tab has been removed from the
Cover the opening with plastic tape.
cassette.
You cannot dub tapes.
The tab of the cassette in deck B has
Cover the opening with plastic tape.
been removed.
Unbalanced tone in higher frequencies.
The DOLBY NR switch is not in the
Set the DOLBY NR switch to the same
correct position.
position as was set for recording.
Unclear recording or playback.
Dirty head.
Clean and demagnetize the recording/
playback head.
Excessive wow or flutter, or sound
Dirty capstan and pinch roller.
Clean the capstan and pinch roller.
dropout.
Incomplete erasure.
Magnetized head.
Demagnetize the erasing head.
NJ
0