Cisco ASA 5506H-X 섀시 마운트 - 페이지 6
{카테고리_이름} Cisco ASA 5506H-X에 대한 섀시 마운트을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASA 5506H-X 10 페이지. Threat defense reimage guide
Cisco ASA 5506H-X에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (14 페이지), 간편한 설정 매뉴얼 (11 페이지), 소프트웨어 설명서 (37 페이지), 설치 매뉴얼 (46 페이지)
페이지 인쇄
Rack-Mount the Chassis
Figure 4: Install the Power Supply in the Rack Shelf
Velcro straps for power supply
1
3
Power supply stop
5
Rear sliding stop and screw (one of two screws on the
sliding stop)
a) Loosen the Velcro straps and place the power supply on the rack shelf behind the chassis.
Make sure the AC inlet cord faces the rear.
b) Align the power supply to the side and rear stops.
If the rear sliding stop is not touching the power supply, loosen the two screws, slide the stop up to touch the power
supply, and then retighten screws.
c) Re-engage the Velcro straps and tighten them to secure the power supply.
Mount the Chassis
6
Velcro straps for power supply
2
4
Power supply stop
—
Mount the Chassis