Sony MEX-BT3100P 사용 설명서 - 페이지 26
{카테고리_이름} Sony MEX-BT3100P에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MEX-BT3100P 50 페이지. Bluetooth audio system
Sony MEX-BT3100P에 대해서도 마찬가지입니다: 사양 (6 페이지)
페이지 인쇄
G:\#sagyou\0613\4427433111\4427433111MEXBT3100PUC\01GB-
MEXBT3100PUC\040CD.fm
000COV.book Page 26 Wednesday, June 13, 2012 9:30 PM
Operations during a call
Presetting the volume of the ringtone
and talker's voice
You can preset the volume level of the
ringtone and talker's voice.
To adjust the ringtone volume:
Rotate the control dial while receiving a call.
Ringtone volume can be adjusted.
To adjust the talker's voice volume:
Rotate the control dial during a call. The
talker's voice volume can be adjusted.
Note
If the Bluetooth Phone source is selected, rotating
the control dial will only adjust the talker's
volume.
Mic gain adjustment
You can adjust the volume for the other
party. Press (MIC) to adjust the volume
levels ("MIC-LOW," "MIC-MID," "MIC-
HI").
EC/NC Mode (Echo Canceller/Noise
Canceller Mode)
You can reduce echo and noise.
Press and hold (MIC) to set to "EC/
NC-1" or "EC/NC-2."
Call transfer
In order to activate/deactivate the
appropriate device (this unit/cellular
phone), press or use your cellular
phone.
Notes
• For details on cellular phone operation, refer to
your cellular phone manual.
• Depending on the cellular phone, handsfree
connection may be cut off when call transfer is
attempted.
26
Preset dial
Contacts (up to 6) in the phonebook can be
stored in the preset dial.
1
Select a phone number that you want to
store in the preset dial, from the
phonebook, call history* or by
inputting the phone number directly.
The phone number appears in the
display of this unit.
* For the call history, you can also select from
the caller name. In this case, the caller name
appears in the display of this unit.
2
Press and hold a number button (
to ) to select the preset number to
store until "MEM" appears.
The contact is stored in the selected
preset number.
Voice dial activation
You can activate voice dialing with a cellular
phone connected to this unit by saying the
voice tag stored on the cellular phone, then
make a call.
Press and rotate the control
1
dial until "VOICE DIAL" appears, then
press it.
2
Say the voice tag stored on the cellular
phone.
Your voice is recognized, and the call is
made.
Notes
• Check that the unit and cellular phone are
connected beforehand.
• Store a voice tag on your cellular phone
beforehand.
• If you activate voice dialing with a cellular
phone connected to this unit, this function may
not always work in some cases.
• Voice dialing may not work in some situations,
depending on the effectiveness of the cellular
phone's recognition function. For details, see
the support site on the back cover.
masterpage:Left
MEX-BT3100P
4-427-433-11(1)