Sony MEX-BT3800U - Bluetooth Audio System 사용 설명서 - 페이지 26
{카테고리_이름} Sony MEX-BT3800U - Bluetooth Audio System에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MEX-BT3800U - Bluetooth Audio System 44 페이지. Bluetooth audio system
Sony MEX-BT3800U - Bluetooth Audio System에 대해서도 마찬가지입니다: 설치/연결 (2 페이지), 제한 보증 (1 페이지), 설치/연결 (2 페이지), 사양 시트 (2 페이지), 서비스 매뉴얼 (50 페이지)
t».fl.!"!
Repeat steps 3 and 4 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
S
Press
~
(BACK).
The setting is complete and the display
returns to normal reception/play mode.
Tip
Other equalizer types are also adjustable.
Customizing the equalizer curve
-EQ3
"CUSTOM" of EQ3 allows you to make your
own equalizer settings.
1
Select a source, then press the select
button repeatedly to select "EQ3."
2
Rotate the control dial to select
"CUSTOM."
3
Press the select button repeatedly
until "lOW," "MID" or "HI" appears.
4
Rotate the control dial to adjust the
selected item.
The volume level is adjustable in I dB steps,
from -10 dB to + 10 dB.
•
, rill
L
U/l~
.l
I
E1J3h'"
,- 171
1Il~
DO~
~~u
AUX-A*1 (AUX Audio)
Activates the AUX source display: "ON,"
"OFF" (page 27).
A.OFF (Auto Off)
Shuts off automatically after a desired time
when the unit is turned off: "NO," "30S
(Seconds)," "30M (Minutes)," "60M (Minutes)."
MIC*1 (Microphone)
- "EXT": to automatically switch to the external
microphone when it is connected.
- "INT": to select only the internal microphone.
DEMO (Demonstration)
Activates the demonstration: "ON," "OFF."
DIM (Dimmer)
Changes the display brightness: "ON," "OFF."
A.SCRl (Auto Scroll)
Scrolls long items automatically: "ON," "OFE"
lOCAL (Local Seek Mode)
- "ON": to only tune into stations with stronger
signals.
- "OFF': to tune normal reception.
MONO*2 (Monaural Mode)
Selects monaural reception mode to improve
poor FM reception: "ON," "OFE"
Z.TIME (Zappin Time)
Selects the playback time for the ZAPPIN
function.
- "Z.TIME-l (about 6 seconds)," "Z.TIME-2
(about 9 seconds)," "Z.TIME-3 (about 30
seconds)."
26
Adjusting setup items - SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the control dial to select the
setting (example "ON" or "OFF").
4
Press and hold the select button.
The setup is complete and the display returns
to normal reception/play mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
ClOCK-ADJ (Clock Adjust) (page 7)
CT (Clock Time)
Activates the CT function: "ON," "OFF"
(page 17).
BEEP
Activates the beep sound: "ON," "OFF."
lPF (Low Pass Filter)
Selects the subwoofer cut-off frequency: "OFF,"
"80Hz," "100Hz," "120Hz," "140Hz," "160Hz."
lPF NORM/REV (Low Pass Filter Normal!
Reverse)
Selects the subwoofer phase: "NORM," "REV"
HPF (High Pass Filter)
Selects the front/rear speaker cut-off frequency:
"OFF," "80Hz," "100Hz," "120Hz," "140Hz,"
"160Hz."
lOUD (Loudness)
Reinforces bass and treble for clear sound at low
volume levels: "ON," "OFF."
DM+
Activates the DM+ function: "ON,""OFF."
BTM (page 16)
BT INIT*1 (Bluetooth Initialize) (page 25)
*
1 When the unit is turned off.
*2 When FM is received.