Sony MEX-GS620BT 사용 설명서 - 페이지 8

{카테고리_이름} Sony MEX-GS620BT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sony MEX-GS620BT 38 페이지. Bluetooth audio system
Sony MEX-GS620BT에 대해서도 마찬가지입니다: 사용 설명서 (41 페이지)

페이지 인쇄

C:\Works\4687334111\4687334111MEXGS620BTUC\01GB-MEX-GS620BTUC\030CD.fm

010COV.book Page 8 Monday, September 5, 2016 7:34 PM

Preparing a BLUETOOTH Device

You can enjoy music, or perform handsfree calling

depending on the BLUETOOTH compatible device

such as a smartphone, cellular phone and audio

device (hereafter "BLUETOOTH device" if not

otherwise specified). For details on connecting,

refer to the operating instructions supplied with the

device.

Before connecting the device, turn down the

volume of this unit; otherwise, loud sound may

result.

Connecting with a Smartphone by One

touch (NFC)

By touching the control dial on the unit with an

NFC* compatible smartphone, the unit is paired and

connected with the smartphone automatically.

* NFC (Near Field Communication) is a technology

enabling short-range wireless communication

between various devices, such as mobile phones and

IC tags. Thanks to the NFC function, data

communication can be achieved easily just by

touching the relevant symbol or designated location

on NFC compatible devices.

For a smartphone with Android OS 4.0 or lower

installed, downloading the app "NFC Easy Connect"

available at Google Play™ is required. The app may

not be downloadable in some countries/regions.

Activate the NFC function on the

smartphone.

For details, refer to the operating instructions

supplied with the smartphone.

Touch the N-Mark part of the unit with

the N-Mark part of the smartphone.

Make sure that

lights up on the display of the

unit.

To disconnect by One touch

Touch the N-Mark part of the unit with the N-Mark

part of the smartphone again.

Notes

 When making the connection, handle the

smartphone carefully to prevent scratches.

 One touch connection is not possible when the unit is

already connected to another NFC compatible device.

In this case, disconnect the other device, and make

connection with the smartphone again.

Pairing and connecting with a

BLUETOOTH device

When connecting a BLUETOOTH device for the first

time, mutual registration (called "pairing") is

required. Pairing enables this unit and other devices

to recognize each other.

Place the BLUETOOTH device within 1 m

(3 ft) of this unit.

Press MENU, rotate the control dial to

select [BLUETOOTH], then press it.

Rotate the control dial to select [SET

PAIRING], then press it.

Rotate the control dial to select [SET

DEVICE 1]* or [SET DEVICE 2]*, then press

it.

flashes while the unit is in pairing standby

mode.

* [SET DEVICE 1] or [SET DEVICE 2] will be changed

to the paired device name after pairing is

complete.

Perform pairing on the BLUETOOTH

device so it detects this unit.

Select [MEX-GS620BT] shown in the

display of the BLUETOOTH device.

If your model name does not appear, repeat

from step 2.

If passkey* input is required on the

BLUETOOTH device, input [0000].

* Passkey may be called "Passcode," "PIN code,"

"PIN number" or "Password," etc., depending on

the device.

Input passkey

[0000]

When pairing is made,

stays lit.

masterpage: Left

MEX-GS620BT

4-687-334-11(1)